Transporting The Unit; Lifting Points; Weight - Flexit L12 X Operating Instructions Manual

2 transporting the Unit

2.1 lifting Points

The unit must be lifted using a truck/jack trolley (Fig. 1/2) or lifting straps. Remember to use 2 jack trolleys/trucks,
one from each side, to avoid the unit tipping down onto the floor and the base being damaged.,
If you choose to use jack trolleys or trucks to lift the unit in the middle, use equipment that has sufficiently long forks.
The forks on the jack trolley/truck should correspond at least to the width of the unit.

2.2 Weight

Data
Gross unit weight
Fans
Heat recovery system
Doors
Net weight for transport inside
When the exchanger cassette is removed, the moisture rod must be taken out of the cassette and the
contact for the bypass motor released.
Fig. 1
l12 l18
165 kg 306 kg
28 kg (2 fans) 42 kg (2 fans)
16 kg 29 kg
25 kg (2 doors) 91 kg (6 doors)
97 kg 144 kg
l20
320 kg
56 kg (2 fans)
29 kg
91 kg (6 doors) 91 kg (6 doors)
144 kg
4
Fig. 2
l30 l50
360 kg 510 kg
56 kg (2 fans) 86 kg (2 fans)
33 kg 37 kg
42 kg (5 doors)
180 kg 329 kg