Step-By-Step Assembly - ODYN LeetDesk 1.0 Series Assembly & Instruction Manual

Step-by-step assembly

Before assembling your desk, make sure that all the previously
listed components are present.
Step 1
Align the holes of the side bracket (1), the frame (2) and the
table leg (4).
Then put the M6×35 machine screw with round head (marked
with the blue dot) (11) into the holes and tighten the screws
with a 4mm hexagon wrench. Repeat the process on the other
side of the desk.
2
8
4
11
1
4