Advertisement
Quick Links
Advertisement
Related Manuals for ODYN LeetDesk 1337-1
Summary of Contents for ODYN LeetDesk 1337-1
- Page 1 LeetDesk Electrically Height-adjustable Gaming Desk Assembly & Instruction manual...
- Page 2 1. General notes and liabilities 1.1 About this manual Please read this manual carefully and thoroughly and keep it for future reference. This applies to all persons building, using, maintaining or repairing this desk. This manual includes valuable information for a safe and proper usage of the desk. Should you have any questions please refer to this manual or contact us at info@leetdesk.com.
- Page 3 1.4 Important safety notes Before using the desk make sure there are no objects or obstacles blocking your LeetDesk. Also make sure LeetDesk is not touching any walls/objects and all cables from your PC and your peripherals have the appropriate length to accommodate the height-adjustability of the desk.
- Page 4 1.5 Electricity warnings Any electrical components of the desk are not to be exposed to water or any other liquids. Do not twist, bend or strain the cables of the desk as this will lead to damaging your desk as well as danger of electric shock. Keep children away from the desk, especially the electrical components such as power cable, control box and handset.
- Page 5 1.6 Safety Precautions In the case of unusual occurrences such as smoke or loud noises immediately cease operation of the desk and unplug it from the power outlet. Should the desk move in an unusual, non-intended way unplug the desk from the power outlet and get it checked by a professional. Repairs are only to be made by professionals and with original replacement parts.
- Page 6 2. Assembly 2.1 Preparation Before beginning assembly, please make sure that all your components in the box are present and undamaged. In the extremely rare event that a part is missing or even damaged, please send us an email to info@leetdesk.com and we will help you to resolve this issue immediately.
- Page 7 2.2 Parts List / Required Tools Table Leg Handset Table Foot Power Cable Frame Piece A Connection Cable Frame Piece B Frame Screws A (short) Central Rails Frame Screws B (long) Side Brackets Wood Screws Control Box 15a/b: Cable management Rail (optional)
- Page 8 2.3 Step-by-step assembly Make sure that all the previously listed components are present. Pull frame piece A and frame piece B (3a & 3b) outwards to reveal the central rails (4). Remove the control box (6) and place it somewhere else for the time being.
- Page 9 Place one table leg (1) into the frame piece A(3a). Fix it to the frame pieces using the pre-drilled holes with the short frame screws A (10) Make sure the attachment rail for the control box (arrow) is facing upwards. Should one of the screws fall into the frame, simply tilt the frame piece to get it back out.
- Page 10 Attach the side bracket (5) to the frame piece (3a) and fix it with the long frame screws B (11). Repeat this whole process with the other table leg.
- Page 11 Slide the two central rails (4) into the frame pieces (3a & 3b). Make sure that the openings of the rails are aligned to the center of the frame pieces. Also make sure that the thinner „lip“ of the central rails are at the top of the frame pieces.
- Page 12 Our LeetDesk Goliath and LeetDesk Core models will already have pre-drilled holes in the tabletop for you to align your table frame with. Please check both sides of your tabletop to find the side with the pre-drilled holes. Adjust the size of the table frame like shown on the picture above so the 7 holes of the table frame line up with the holes in the tabletop...
- Page 13 Use the wood screws (12) to fix the table frame to your tabletop. Again, make sure the holes of the table frame are properly aligned with the holes on the tabletop. Attach the handset (13) using the shorter wooden screws included in your package. You can attach the handset to either side of your LeetDesk, so you will find no pre- drilled holes for the handset.
- Page 14 Use 8 of the long frame screws (11) to fix the central rails to the frame pieces (3a & 3b). Make sure the screws are touching the central rails! This is to keep them in place and increase the stability of your LeetDesk.
- Page 15 Slide the control box (6) back into the table frame (3a). Connect the cable of the handset (7) into the slot of the control box (6) labelled „HS“. Connect both of the table legs (1) with the corresponding 6-pin connectors of the control box, use the extension cable included in the box if needed.
- Page 16 If you have ordered our cable management rail, align the holes of the rail with the 4 pre-drilled holes and use the wooden screws included in the package. If you have ordered our PC Holder, please refer to the separate PDF. After you have finished assembly, flip the table to the correct position with the help of another person.
- Page 17 3. How to use your LeetDesk 3.1 First Use Before first use, please make sure once again, that there are no obstacles in the way of the LeetDesk when moving it up or down. Also make sure, that your desk is not directly touching the wall, as otherwise it could potentially damage your walls during movement.
- Page 18 3.2 General usage Move your LeetDesk up and down with the + and - buttons respectively. Simply press and hold the corresponding buttons until the desk has reached your preferred height. The current height will be displayed on the handset. You can save your preferred height settings with the memory setting.
-
Page 19: Technical Specifications
4. Technical specifications Maximum lifting capacity 100 kg Maximum stroke 650 mm Lowest position 60 cm Highest position 125 cm Voltage 220 V - 240 V, 50 Hz Usage Cycle 10% (2 minutes constant movement, 18 minutes off) Movement speed (no load) 38 mm/s 5. -
Page 20: Eu Conformity Declaration
Product numbers: 1337-1, 1337-2, 1337-3 Plenipotentiary for the collection of technical documents: ODYN GmbH, Oststraße 116, 40210 Düsseldorf We hereby declare, that the products mentioned above meet all the requirements of the „Maschinenrichtlinie 2006/42/EG“. The above mentioned products also meet the requirements for the following: Guideline 2014/35/EU („Niederspannungsrichtlinie“)