Electricity Warning - ODYN LeetDesk 1.0 Series Assembly & Instruction Manual

Electricity warning

Any electrical components of the desk are not to be exposed
to water or any other liquids.
Do not twist, bend, squeeze or strain the cables of the desk as
this will lead to damaging your desk or to an electric shock.
Keep children away from the desk, especially the electrical
components such as power cable, control box and handset.
Only connect the desk to the power after it has been fully and
properly assembled. Make sure the power cable is inserted
correctly into the power outlet before usage.
Do not under any circumstances open any of the electrical
components (table legs, control box, handset, motors) as this
could lead to an electric shock which may result in serious
injuries or even death.
LeetDesk is made for a work cycle of 10% (2 minutes of
movement, 18 minutes stationary). Do not overwork the
electrically height- adjustable desk, it will only take exactly 20
seconds to move it from the lowest to the highest position.
If the handset displays "HOT", stop the movement of the table
immediately for at least 18 minutes.
In case of a power outage, you will have to manually reset your
table. In this case, please refer to the section "Factory Reset".
4