ODYN LeetDesk 1.0 Series Assembly & Instruction Manual page 16

Step 7
Turn the assembled desk right side up. With at least two
people, grab the foot of the desk (not the tabletop) and turn
the desk on the right side up.
Adjust the pre-installed glides on the feet (5) if needed.
Step 8
Plug the power cord (15) into a 230V outlet.
FINISH: After you have finished the assembly, flip the table to
the correct position with the help of another person. Do not
attempt to flip it by yourself as the LeetDesk is very heavy
(< 40 kg)!
Information: Most issues with your LeetDesk can be
solved by doing a factory reset (see page 16).
15