How To Use Your Leetdesk; First Use; Factory Reset - ODYN LeetDesk 1.0 Series Assembly & Instruction Manual

How to use your LeetDesk

Before first use, please make sure that there are no obstacles
in the way of the LeetDesk when moving it up or down. Make
sure, that your desk is not directly touching the wall, as it could
potentially damage your walls during movement.
Make sure all electronic devices that you plan to use at your
table have cables that are long enough, even when the table is
in the highest position.
Do a factory reset before first using your LeetDesk:
1. Reset the control box by pressing and holding the
Down/- button until the table has reached its lowest
position.
2. Let go of the Down/- button and press and hold it
again until the handset will display "RST".
3. Let go of the Down/- button and press it again and
hold the button until the table moves down a little
lower, then rises a little bit and stops. Then let go of
the Down/- button.
4. Now your LeetDesk is ready for use!

First Use

Factory Reset

16