General Usage; Anti-Collision Detection - ODYN LeetDesk 1.0 Series Assembly & Instruction Manual

General usage

Move your LeetDesk up and down with the Up/+ and Down/-
buttons respectively. Simply press and hold the corresponding
buttons until the desk has reached your preferred height. The
current height will be displayed on the handset.
You can save your preferred height settings with the memory
setting. In order to save your current desk height to one of the
three memory settings, simply press the M button and then one
of the numbered buttons.
Your LeetDesk will always move back to the position you saved
all by itself after pressing the numbered button.

Anti-collision detection

All LeetDesk models have an anti-collision system. If during
movement the LeetDesk is bumped or moved in any way, the
table will cease movement and move to the opposite direction
it was moving for about 1-2 cm.
This is to prevent accidentally damaging people or objects
through the movement of the desk.
17