Mitsubishi Electric 800 Series Instruction Manual page 16

 Major functions list
Function
Vector control (speed control)
Vector control (torque control)
Vector control (position control)
Servo lock (pre-excitation selection)
Droop control
Brake sequence
Encoder signal loss detection (E.ECT)
Notch filter
Anti-sway control
Magnetic flux command
Overspeed detection (E.OS)
Speed deviation excess (E.OSD)
Speed limit
: Supported, : Not supported

Available only when Pr.819 = "2" (load inertia ratio manual input)
16
FR-A8APS FUNCTIONS
IM PM
  Deceleration check
Forward rotation output (Y30) signal/ Reverse

 rotation output (Y31) signal/ Regenerative
status output (Y32) signal
  Encoder position tuning
  Absolute position control
  Encoder pulse dividing output
  Model adaptive / Speed feed forward control
  Easy gain tuning
  Torque bias
  Encoder feedback control

 Orientation control
  Machine end orientation control
  X18 signal switchover


Function IM PM
 
 


 
 
 
 





 
 

