Introduction; The I-Jet In-Circuit Debugging Probe - IAR SYSTEMS I-jet User Manual

The I-jet In-Circuit Debugging Probe

Introduction

This chapter gives a short overview of the I-jet in-circuit debugging probe.
More specifically, this means:
The I-jet In-Circuit Debugging Probe
●
Requirements
●
Supported ARM core families
●
Supported operating systems
●
Connections.
●
I-jet is an in-circuit debugging probe, which connects to the target board via a JTAG or
SWD connection, and to the host PC via the USB port. I-jet is also referred to as a debug
probe, debug adapter, or JTAG in-circuit emulator by different tool vendors.
Figure 1: The I-jet in-circuit debugging probe
5