Pottery Barn Wall Mounted Wedding Shadow Box Mounting Instruction

HARDWARE INCLUDED:

(2) Screws

(2) Anchors

Note: The provided mounting hardware is meant for

drywall and stud construction only. For other wall

types, please consult your local hardware store for

assistance in selecting the appropriate hardware.

Mounting Instructions:

Measure the exact distance between the center

of keyholes.

Connect the two points (A, B) with a light pencil line. Use a level to ensure that the line is level.

Make two insertion marks (C, D) centered along the line using the measurement "a".

Wall Mounted Wedding Shadow Box

Mounting Instruction

TOOLS NEEDED (not included):

With the back of the item facing away from the wall,

hold it against the wall at a desired mounting

location. Mark two reference points (A, B) on the

wall as shown.

1 / 2

Table of Contents

Do you have a question about the Wall Mounted Wedding Shadow Box and is the answer not in the manual?

Page 1 Wall Mounted Wedding Shadow Box Mounting Instruction HARDWARE INCLUDED: TOOLS NEEDED (not included): (2) Screws (2) Anchors Note: The provided mounting hardware is meant for drywall and stud construction only. For other wall types, please consult your local hardware store for assistance in selecting the appropriate hardware.
Page 2 Use a stud-finder to determine if there is a wall stud located at either insertion mark. Install the proper hardware, as shown below. Note that the head of each screw resides about 3/8” from the wall. For stud mounting: For non-stud mounting: Tips: The anchor is self-drillable.