Table of Contents
Advertisement
Quick Links
Note: Professional installation required
Important safety instructions:
Please read all instructions carefully before assembling. For your safety, assembly by two people is recommended.
The maximum individual shelf weight capacity is 10lbs. Do not exceed the load capacity.
This hanging system is meant for drywall/stud mounting only.
If walls are concrete, brick or plaster, please consult your local hardware store for assistance.
For safety, installation by two people is recommended.
Tool Required (Not Included):
Stud Finder Phillips Screwdriver
Parts Included:
(1) Wooden Cabinet - A
:
Hardware Included
(3)Toggle -a
(8) L-shape pegs -e
Pre-Assembly:
Remove all parts and hardware from the box and lay out on a clear workspace, along with any plastic protective
packaging. Do not dispose of any contents until assembly is complete to avoid accidentally discarding small parts or
hardware.
Use the parts and hardware lists above to identify and separate each of the pieces included.
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
Modular Wall Storage Open Cubby
(1) Wall rail–B
(3) Toggle Screw -b
Pencil
(2) Wooden Shelf –C
(1) Wood Screw) –c
Page 1 of 3
(1) Wooden plug - d
Advertisement
Table of Contents
Related Manuals for Pottery Barn Modular Wall Storage Open Cubby
Summary of Contents for Pottery Barn Modular Wall Storage Open Cubby
- Page 1 Modular Wall Storage Open Cubby Note: Professional installation required Important safety instructions: Please read all instructions carefully before assembling. For your safety, assembly by two people is recommended. The maximum individual shelf weight capacity is 10lbs. Do not exceed the load capacity.
- Page 2 Modular Wall Storage Open Cubby MOUNT WALL RAIL TO THE WALL (See Figure 1) 1. Find wall studs and determine the desired placement on the wall for the product. Position the wall rail (B) on the wall and adjust so that the rail is level. It is better to mount the wall rail to at least (1) stud. Then, use a felt-tipped pen to mark the wall through the three pre-drilled holes of the rail to indicate the locations of the drywall toggles.
- Page 3 Modular Wall Storage Open Cubby Figure 2 Assembly Instructions: 1. On the inside of the cabinet, insert the L-shape pegs (e) into the pre-drilled holes on the interior side of the wooden cabinet (A) to set each shelf at a desired level – FOUR per shelf. Once all four pegs (e) are in position, gently place wooden shelf (C) onto the L-shape pegs (e).
Need help?
Do you have a question about the Modular Wall Storage Open Cubby and is the answer not in the manual?
Questions and answers