Pottery Barn Printers Writing Desk Assembly Instructions

Pre-Assembly:

•
Please read all instructions before beginning assembly.
•
Use the parts and hardware lists to identify and separate each of the components included.
•
Save all packing materials until the assembly is completed to avoid the accidental discarding of
smaller parts or hardware.

Part Included:

(1) Top - A

Hardware enclosed:

(8) Flat Washer - C
(8) Wood Screw
(#8*16mmL )
Assembly Instructions:
1. Carefully lay the Top (A) upside down on a carpet or the foam in shipping box. Attach the Leg (B) to Top
(A) by inserting the hanger bolts on the leg into pre-drilled hole on the corner brace of top. Secure by
Flat Washer (C), Lock Washer (D) and Nut (E) by Allen Wrench (F)
2. Slowly turn the table upright by its back to keep the drawer from running out. Adjust the leveler under
legs if the table doesn't sit level. Assembly is completed.
1/ 2
Printers Writing Desk
Assembly Instructions
(4) Leg - B
(8) Lock Washer - D
B
A
(8) Nut - E
F
C D
E
(1) Allen Wrench - F