Pottery Barn Mason Double Console with Sink Assembly Instructions

Please read all instructions before beginning assembly.
For your safety and convenience, assembly by two people is recommended.
Use the parts and hardware lists to identify and separate each of the components included.
Save all packing materials until assembly is complete to avoid the accidental discarding of smaller parts or hardware.
A standard 8" spread faucet should be used with this sink console.
Note : Console need to be leveled and mounted to both wall and floor. Some hardware items needed for proper assembly and
installation are not included : ex. Shim, spacer, high quality silicone or acrylic based bath sealant, etc.
Note : Avoid moving the top after it has been set into place.

PARTS Included:

1 –Square Basin – (1 x)
2 – Console base – (1 x)
Assembly Instructions: .
1.
Leveler adjustment: Levelers are pre-installed on the legs and adjust as needed to make sure the console is leveled. Turn
counter-clockwise to increase height, clockwise to decrease height. See Fig. 1.
Mason Double Console with Sink
Assembly Instructions
1
2
Page 1 of 3