Ipv6 Settings; Wan Setting; Auto Config (Dhcp) + Link Type Ip - PROLiNK PRN3009 Product User Manual

PROLiNK® PRN3009 Wireless-N 300 Routers
4.4

IPV6 Settings

WAN Setting

PRN3009 is the IPV6 ready router. This page is used to configure parameter for internet network which
connects to WAN port of your router, this to enable IPv6 function and set up the WAN settings for IPv6
connection. There is two connection type first is Auto-Config (DHCP) and Fixed IP
Origin Type - Setup the initializing mode for the WAN interface.
Stateless Address Auto. Configuration - Stateless address autoconfiguration, the device is able to
pick its own IPv6 address based on the prefix being advertised on the connected ISP.
Prefix Delegation - Used for ISP creating IPv6 subnet via SLAAC ID (Network ID) and SLAAC
Length (Subnet Mask).
MLD Proxy - Proxy used for IPv6 Multicast Listener Discovery.

Auto Config (DHCP) + Link Type IP

58