Client / Client (WISP) Mode Setup
The following is a step to setup PRN3009 as a Client or Client WISP. Make sure your internet
connection source is coming from the main router. Follow the step below to complete the hardware
connection.
1. Turn OFF PRN3009 Router.
2. Connect Ethernet cable between Computer LAN port to PRN3009 LAN port.
3. Turn ON power PRN3009 and Please ensure the power LED indicator is light up once turn-on.
The booting up process takes a few seconds to complete. When the PRN3009 is ready to set up,
the LED indicator for Power, Wi-Fi, and LAN lit up green.
PROLiNK® PRN3009
Wireless-N 300 Routers
9