Ap (Access Point) Mode Setup - PROLiNK PRN3009 Product User Manual

AP (Access Point) Mode Setup

The following is a step to setup PRN3009 as AP Mode. If the internet connection is coming from the
Main router, follow the following step below to complete the hardware connection.
1. Turn OFF Main Router/Existing Router
2. Connect Ethernet cable between Main/Existing Router LAN ports to PRN3009 WAN Port.
3. Connect Ethernet cable between Computer LAN port to PRN3009 LAN port.
4. Turn ON power Main/Existing Router and PRN3009 Router. Please ensure the power LED
indicator is light up once turn-on. The booting up process takes a few seconds to complete.
When the PRN3009 is ready to set up, the LED indicator for Power, Wi-Fi, WAN and LAN lit
up green.
PROLiNK® PRN3009 Wireless-N 300 Routers
7