PROLiNK PRN3009 Product User Manual page 16

To verify the connection between Computer and PRN3009 Router, you need to run the command
prompt and execute Ping command to PRN3009 Router IP address. To complete Ping command, you
need to type ping 192.168.123.254 then press Enter to start ping command. The ping test result, as
shown in the following figure.
If you encounter different result from the above, it indicates your connection between Computer and
PRN3009 Router is failed. The following step is to rectify the connection issue:
1. Check the physical connection between Computer and PRN3009 Router. Ensure the Ethernet
cable is inserted correctly into the LAN port. At the same time observe the LED indicator on
PRN3009 Router and on Computer network adapter (if applicable)
2. Ensure the IP Address provided by PRN3009 is valid and not overlapping with other Computer
by checking through the TCP/IP configuration of the network adapter.
PROLiNK® PRN3009 Wireless-N 300 Routers
11