2. By click "Site Survey" to scan the host network if your host network is hidden, you need to
enter it manually. Select the network host and enter the Network Key. Note that if the PRN3009
in Client (WISP) Mode, the PRN3009 will no longer accept wireless clients or broadcast the
wireless signal.
3. After click "Save/Apply", PRN3009 will reboot and if your PC connected to the Wi-Fi while
setup the Client (WISP) Wizard, please connect using wired connection to the LAN Port of
PRN3009. Refer hardware setup "Client/Client (WISP) Mode Setup". After the PC is connected,
user need to login and it shows the wizard page with the "Client (WISP)" configuration set
earlier.
PROLiNK® PRN3009
Wireless-N 300 Routers
34