Hardware Setup; Router Mode Setup - PROLiNK PRN3009 Product User Manual

2.3

Hardware Setup

There are several different ways you can configure your PRN3009 to connect to the Internet and
connect to your clients. The routers features come with 6 different modes. Step guide below shows how
the hardware connection setup for each mode available for PRN3009. Please first make sure that your
PRN3009 Routers is near to the socket-outlet and near the Internet source. Then connect the PRN3009
Routers by following the instructions below.

Router Mode Setup

The following is a step to setup PRN3009 as a Router. Make sure your internet connection source is
coming from the ONT/Cable/DSL modem or any other internet source. Follow the step below to
complete the hardware connection
1. Turn OFF the modem, or if the modem has a backup battery, you need to remove it first.
2. Connect Ethernet cable between Modem to PRN3009 WAN port.
3. Connect Ethernet cable between Computer LAN port to PRN3009 LAN port
4. Turn ON power for Modem and
up once turn-on. The booting up process takes a few seconds to complete. When the PRN3009
is ready to set up, the LED indicator for Power, Wi-Fi, WAN and LAN lit up green.
®
PROLiNK PRN3009 (R)
PRN3009 and please ensure the power LED indicator is light
Wireless-N 300 Routers
6