Description Of Terms And Symbols - Sony PCS-G50 Service Manual

4-1-3. Description of Terms and Symbols

The meaning of the terms and symbols used in this Section
are as follows.
Command
command> auto ↓:
pcsdb> goto diag ↓: Input "goto diag" in the
↓:
SH Bus Devices
The following are the devices connected to the SH host bus
of the unit.
These devices are indicated in the flow chart and descrip-
tion as "SH devices".
SH bus devices on the CPU-382 board
. Flash Memory (IC201, IC203)
. SDRAM (IC202,IC204, IC206, IC208)
. SRAM (IC209)
. System Port PLD (IC302)
. Disk On Chip (IC405)
. Memory Stick Controller (IC504)
. Graphics (IC601)
. VOA (IC801)
. Audio FPGA (AFPGA) (IC1001)
. DSP (MUX) (IC1651)
. USB Controller (IC2102)
SH bus devices on the DSP-113 board
. DSP (ENC) (IC201)
. DSP (DEC) (IC501)
. DSP (MCU) (IC801)
. SIO1 (IC1101)
. SIO2 (IC1102)
. Video FPGA (VFPGA) (IC1401)
. VIA (IC2101, IC2201)
4-2
Input "auto" in the com-
mand prompt of the Diag
mode, and press the Enter
key.
command prompt of the
application software, and
press the Enter key.
Indicates the pressing of the
Enter key.
PCS-G50/G50P