Introduction; Delivery Inspection; Serial Plate Location; Accessories In Machine - UNITY LAUNDRY SYSTEMS UTS62 Installation And Maintenance Instructions Manual

Thank you for the purchase of a Unity Laundry Systems washing machine. Please read this manual carefully before installing
and operating the washer.

1.1 DELIVERY INSPECTION

Upon delivery, visually inspect crate, protective cover, and unit for any visible shipping damage. If signs of possible damage
are evident, have the carrier note the condition on the shipping papers before the shipping receipt is signed, or advise the
carrier of the condition as soon as it is discovered.
The washer has protective adhesive film on the the front and side stainless steel panels. The film may be peeled off before
putting the machine into service.

1.2 SERIAL PLATE LOCATION

The serial plate is located at the rear of the machine. Provide the machine's serial number and model number for warranty
information, when ordering parts or seeking technical assistance.

1.3 ACCESSORIES IN MACHINE

Accessory
User Manuals (Installation, Operation,
Wiring)
Warranty Card
Registration Card
Shims
Shock Absorbers
Hose adapters
Clamps for Drain Hose
Drain Hose
Keys
1.4 CUSTOMER SERVICE & REPLACEMENT PARTS
If you require any technical assistance or replacement parts for your washing machine in the future, please contact Unity
Laundry Systems.
®/™ ©2019 Unity Laundry Systems. All rights reserved.

01 INTRODUCTION

Quantity
1 (each)
1
1
2
2
3
2
1
2
6
Part. 14000101 Rev. 12/2019