Foundation Requirements; Water Connection - UNITY LAUNDRY SYSTEMS UTS62 Installation And Maintenance Instructions Manual

3.2 FOUNDATION REQUIREMENTS

The machine must be placed on a solid floor which is level in both directions, and of a sufficient strength to be able to support
the weight of the machine, of any existing machinery and the means of transport.
NOTE: Do not mount on tile floors, elevated floor levels, stacked multiple base frames, or over basements or crawl
spaces because of the high extract speed and the G-forces exerted.

3.3. WATER CONNECTION

To connect water service to a machine with hoses, use the following procedure:
1. Before installing hoses, flush the building's water system at the machine connection valves for at least two [2] minutes.
2. Check filters in the machine's inlet adapter hoses for proper fit and cleanliness before connecting.
3. Hang hoses in a large loop; do not allow them to kink.
®/™ ©2019 Unity Laundry Systems. All rights reserved.
03 INSTALLATION
WARNING
To reduce the risk of fire, serious injury, property damage and/or
death, install the machine on a level, uncovered concrete floor of
sufficient strength at grade.
10
Part. 14000101 Rev. 12/2019