Specifications And Dimensions; General Specifications - UNITY LAUNDRY SYSTEMS UTS62 Installation And Maintenance Instructions Manual

2.1 GENERAL SPECIFICATIONS

7
Part. 14000101 Rev. 12/2019

02 SPECIFICATIONS AND DIMENSIONS

MOTOR
Size – HP
CAPACITY
Cylinder Volume – cu. ft. (liters)
Cylinder Diameter – in. (mm)
Cylinder Depth – in. (mm)
Dry Load Capacity – lb. (kg)
OPERATING SPEED & EXTRACT FORCE
Washing Speed (RPM)
Maximum Extract Speed (RPM)
Maximum Extract Force (G-force)
CONNECTIVITY
USB Programmability
DIMENSIONS
Width – in. (mm)
Depth – in. (mm)
Height – in. (mm)
CRATED DIMENSIONS
Width – in. (mm)
Depth – in. (mm)
Height – in. (mm)
APPROXIMATE WEIGHT
Uncrated – lb. (kg)
Crated – lb. (kg)
ELECTRICAL CONNECTION OPTIONS (VOLTS/Hz/PHASE)
208 – 240V / 50-60Hz / 1 PH (no electrical heating)
WATER HEATING OPTIONS
Hot / Cold Water Connections Only
WATER, CHEMICAL DISPENSING, DRAINS
Number of Water Inlets
Inlet Sizes – in. (mm)
Number of Dispenser Compartments
Number of External Chemical Connections
Dump Valve Drain Size – in. (mm)
INSTALLATION RECOMMENDATIONS
Minimum Clearance Between Machines - in (mm)
Minimum Clearance in front of Machines - in (mm)
Minimum Clearance Behind Machines - in (mm)
3.0
8.8 (251.3)
30.5 (774)
21.0 (534)
62 (28.1)
45-50
277
800
Yes
45.4 (1152)
40.9 (1038)
58.4 (1484)
44.9 (1140)
48 (1220)
61.1 (1552)
1433.2 (650)
1653.5 (750)
Yes
Yes
3
1 (25.4)
4
5
3 (76.2)
0 (0)
39.4 (1000)
31.5 (800)
®/™ ©2019 Unity Laundry Systems. All rights reserved.