Removal Of Shipping Braces - UNITY LAUNDRY SYSTEMS UTS62 Installation And Maintenance Instructions Manual

4. Attach the external supply hoses to the ports at each of the drilled holes.
5. Secure with proper clamps.
6. Make the electrical connection as specified.
NOTE: Do not attempt to make chemical injection supply pump electrical connections to points other than those
provided specifically for that purpose by the factory.
3.8.

REMOVAL OF SHIPPING BRACES

After positioning, remove the lower front and back panels and remove the four shipping brackets that were used for
transportation support. Save the shipping brackets. If the washer ever needs to be moved to another location, replace the
transport system.
®/™ ©2019 Unity Laundry Systems. All rights reserved.
03 INSTALLATION
WARNING
DO NOT REMOVE THE SHIPPING RESTRAINTS BEFORE PLACING
THE WASHER IN ITS DEFINITIVE POSITION.
NEVER START THE MACHINE UP WITHOUT FIRST REMOVING THE
SHIPPING RESTRAINTS.
NON-COMPLIANCE WITH THIS PRECAUTION MAY CAUSE SERIOUS
PHYSICAL DAMAGES TO PEOPLE AND IRREPARABLE DAMAGES
TO THE WASHER. THE WARRANTY DOES NOT COVER THIS
INCIDENCE.
14
Part. 14000101 Rev. 12/2019