On-Premise - UNITY LAUNDRY SYSTEMS UTS62 Installation And Maintenance Instructions Manual

5.2 ALARMING
When an error occurs, the computer will signal an alarm automatically with an audible sound. Pressing <Start(Enter)> button
will stop the audible alarm sound. Press <Start(Enter)> button again after troubleshooting to clear the alarm. If the error has
been resolved or can be ignored, the computer will go back to "open" or "close" or "locked" status or else the computer will
alarm again.
NO. ALARM NAME
#1 Error door status
#2 Over shock
5.3 PROGRAMMING AND SETTING
Refer to the Operating manual.
5.4 RUNNING
Startup
After power is on, the LCD shows the startup interface for 10 seconds.
Idle
Default program is Program 1.
®/™ ©2019 Unity Laundry Systems. All rights reserved.
04 CONTROL INTERFACE ON-PREMISE
Please check the door switch or door pin.
Please check if the load in the machine is too small or too large.
Unity UTS40
Wash Temp: Cold
FREE MODE
TROUBLESHOOTING
X1LD041AX1700
1.V100A00
X1LL020AX26001-
1.V100A00
4
20
Part. 14000101 Rev. 12/2019