Introduction; Delivery Inspection; Serial Plate Location; Accessories In Machine - UNITY LAUNDRY SYSTEMS UTS29 User Manual

INTRODUCTION

Thank you for the purchase of a Unity Laundry Systems washing machine. Please read this manual carefully before installing
and operating the washer.
1.1

DELIVERY INSPECTION

Upon delivery, visually inspect crate, protective cover, and unit for any visible shipping damage. If signs of possible damage
are evident, take photographs or video and have the carrier note the condition on the shipping papers before the shipping
receipt is signed, or advise the carrier of the condition as soon as it is discovered.
The washer has protective adhesive film on the the front and side stainless steel panels. The film may be peeled off before
putting the machine into service.
1.2

SERIAL PLATE LOCATION

The serial plate is located at the rear of the machines. Provide the machine's serial number and model number for warranty
information, when ordering parts or seeking technical assistance. UTS40 (left), UTS29 & UTS62 (Right) below.
1.3

ACCESSORIES IN MACHINE

Accessory
User Manuals (Installation/Operation/
Maintenance and Schematics)
Warranty Card
Registration Card
Brass inlet valve adapters
Clamps for Drain Hose
Drain Hose
Keys
1.4 CUSTOMER SERVICE & REPLACEMENT PARTS
If you require any technical assistance or replacement parts for your washing machine in the future, please contact Unity
Laundry Systems at 1-800-484-3013.
10
Part. 14000002 Rev. 06//2021
Quantity
2
1
1
3
2
1
2 (UTS40 only)
®/™ ©2022 Unity Laundry Systems. All rights reserved.