JPT LP Series User Manual page 22

Laser_start
Output pulse
Laser_start
Output pulse
Lock power: Laser will lock to GUI setting power.
Red Power: Brightness of built-in red pilot(optional) can be adjusted, value range is 0-100.
External frequency: When selecting external frequency mode, the laser output pulse will be
synchronized with external frequency signal. When not selecting this option, the laser will use
with internal frequency mode. And the laser will calculate external frequency signal in MO and
PA delay time. Default setting is internal frequency mode.
External frequency and internal frequency setting examples:
Laser_start
EXT.FRE
Output pulse
YDFLP-E-20&30&50-LP User's Manual
[High Simmer]
[Low Simmer]
[External Frequency]
18 File Number: S-PI-0033