JPT LP Series User Manual page 21

YDFLP-E-20&30&50-LP User's Manual
Ctrl MO: The "MO" button will be appeared on the interface after selecting Ctrl MO. User can
control the switching of MO signal while clicking this button. This setting will not be preserved
after power off.
2) Default parameter setting and selection
E type software can modify laser default parameter setting and selection in the option of
"Parameter setting" and "Parameter selection". The parameter settings take effect immediately and
save automatically after power down.
Figure23 Default parameter settings and selection
Lock PRR: Laser will lock to GUI setting frequency.
Default pulse: The laser will use GUI default pulse when no pulse width control command
received.
Simmer：Can be used for controlling the height of the first pulse, the higher the value, the larger
the first pulse. Setting range: 0-1000
Simmer setting examples：
Laser_start
Output pulse
[Appropriate Simmer]
17 File Number: S-PI-0033