Advertisement
Table of Contents
INSTALLATION GUIDE
BEFORE YOU START
Prior to installation, choose a suitable location on flat ground for your Stratco Corrugated Garden Bed. Measure the area to
ensure there is enough room. A minimum area of 40" x 28" is required.
To ensure the installation of your Garden Bed proceeds smoothly you should confirm that all components listed in this
installation guide have been supplied. Carefully read this installation guide to familiarise yourself with the steps involved, and
ensure that you have the correct tools and equipment for the job.
NOTE: Use heavy gloves when handling steel sheeting and do not attempt installation in windy conditions.
TOOLS REQUIRED
Phillips Head Screwdriver
Pliers
Safety Gloves
Safety Glasses
STRATCO CORRUGATED
RAISED GARDEN BED
GARDEN BED KIT
RAISED GARDEN BED INSTALLATION GUIDE
INSTALLATION GUIDE
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Stratco CORRUGATED GARDEN BED KIT
Summary of Contents for Stratco CORRUGATED GARDEN BED KIT
- Page 1 INSTALLATION GUIDE BEFORE YOU START Prior to installation, choose a suitable location on flat ground for your Stratco Corrugated Garden Bed. Measure the area to ensure there is enough room. A minimum area of 40” x 28” is required. To ensure the installation of your Garden Bed proceeds smoothly you should confirm that all components listed in this installation guide have been supplied.
- Page 2 Note: Ensure Wingnuts are located on inside Screws Wing Nuts Repeat Steps 1 & 2 for two sides STEP 2 STEP 4 (407) 915-7442 stratcousa.com All brands and logos/images accompanied by ® or ™ are trade marks of Stratco (Australia) Pty Limited. ® Copyright December 2018...
Need help?
Do you have a question about the CORRUGATED GARDEN BED KIT and is the answer not in the manual?
Questions and answers