Stratco LG-18294 Installation Manual

BEFORE YOU START

Prior to installation, choose a suitable location on flat ground for your Garden Bed. Measure the area to ensure there is enough
room, a minimum 48" x 36" is required.
To ensure the installation of your Stratco Garden Bed proceeds smoothly you should confirm that all the components listed in
this installation guide have been supplied. Carefully read this installation guide to familiarise yourself with all the steps involved,
and ensure that you have the correct tools and equipment for the job.
NOTE: Use heavy gloves when handling steel sheeting and flashings and never attempt to install the garden bed in windy
conditions.

TOOLS REQUIRED

Phillips Head Screwdriver

COMPONENTS

Long Panel x 2 Short Panel x 2
RAISED GARDEN BED RAISED GARDEN BED
Pliers
Wingnuts and
Screws x 32
Corner Cap x 4
Corner Angle x 4
RAISED GARDEN BED INSTALLATION GUIDE RAISED GARDEN BED INSTALLATION GUIDE
Safety Gloves
INSTALLATION GUIDE
Safety Glasses