Stratco MODULAR GARDEN BED LG-34498 Install Manual

FORM: GB – 2777
MODULAR GARDEN BED
4 8 " X 3 6 " W O O D - P L A S T I C C O M P O S I T E G A R D E N B E D
BEFORE YOU START
PRIOR TO ASSEMBLY
If you are installing a custom garden bed designs, please confirm you have all
the extra pieces you need for the design. Carefully read this installation guide
to familiarise yourself with all the steps involved before beginning installation.
LOCATION SELECTION
Choose a suitable location for the garden bed's installation. Measure the area
to ensure there is at least 48" x 36" of space. If you have purchased extra
kits and plan to create a custom design, please ensure you measure the full
space required for your garden bed design. Make sure the location is on flat
and level ground.
IMPORTANT NOTES
The garden bed will be difficult to move after assembly. Please choose your
1.
location carefully before beginning assembly
COMPONENTS
To ensure the installation of your Stratco Garden Bed proceeds smoothly
you should confirm that all the components listed in this installation guide
have been supplied.
Long Plank Short Plank
x 4 x 4
®
Corner Post Post Cap
x 4 x 4