Commissioning And Operation; Interrupting Operation - Kärcher 4.112-035.0 Instructions Manual

 Do not operate this attachment if there
are leaks.
 Stop operating the attachment immedi-
ately whenever there are functional dis-
ruptions.
 Never block the depressed triggering
lever of the gun or prevent its closure in
some other way.
 Vehicle tyres or tyre valves are suscep-
tible to damage from the high pressure
jet and may burst. The first indication of
this is a discolouration of the tyre. Dam-
aged vehicle tyres/tyre valves are high-
ly dangerous. Ensure that a distance of
at least 30 cm is observed when clean-
ing with the jet!
NOTICE
 The operator must use the accessory
properly. When working with the appli-
ance, he must consider the local condi-
tions and pay due care and attention to
other persons, in particular children,
who are nearby.
 The appliance must not be operated by
children or persons who have not been
instructed accordingly.
Commissioning and opera-
Description of the Appliance
Illustrations on Page 2
1 Special lance
2 Handle for setting the angle
3 Part to be screwed
4 Adapter 5
5 Adapter 7
tion
Preparing the Appliance
Selecting the high pressure nozzles
In order to ensure that the max. torque of
20 Nm is not exceeded, determine the per-
missible nozzle size.
NOTICE
To determine the nozzle size, use the dia-
grams on the last page of these operating
instructions.
Diagram 1:
 Select the diagram for the respective
spray lance length.
 Draw a horizontal line with max.
throughflow volume (A) of the high-
pressure cleaner and select interface
with torque curve (B).
 Draw a vertical line through the inter-
face and note max. permissible pres-
sure (C).
Diagram 2:
 Select the column with the determined
pressure and browse downwards, until
the value corresponds to the through-
flow value of your high-pressure clean-
er. Follow the line to the left and find
nozzle size (D).
Installing the nozzles
 Unscrew the part that can be screwed.
 Screw on the provided adapter 7 item 5.
 Insert nozzle.
 Screw on the part that can be screwed.
Adjust the angle
To adjust the angle on the special lance,
 slide the handle of the special lance
 Check the pressure and temperature
ranges set at the high-pressure cleaner;
adjust according to the values approved
for accessory.
 Press safety catch on the trigger gun to
release it and pull lever.

Interrupting operation

 Release the lever on the trigger gun.
– 2
EN
Operation
7