Warranty; Safety Instructions - Kärcher 4.112-035.0 Instructions Manual

Please read and comply with
these instructions prior to the
initial operation of your appliance. Retain
these operating instructions for future refer-
ence or for subsequent possessors.
Proper use
The special lance can be tilted steplessly
up to an angle of 120°.
Use this special lance together with a high-
pressure cleaner only
to cleaning hard-to-access machines,
–
vehicles, subfloors, buildings, roofs, fa-
cades etc, with a high-pressure water
jet.
in the given pressure and temperature
–
range.
using approved attachments and spare
–
parts.
The adapters provided are used to con-
–
nect the spray lance to new accesso-
ries.
Environmental protection
The packaging material can be recy-
cled. Please do not place the pack-
aging into the ordinary refuse for disposal,
but arrange for the proper recycling.
Old appliances contain valuable ma-
terials that can be recycled. Please
arrange for the proper recycling of
old appliances. Please dispose your old ap-
pliances using appropriate collection sys-
tems.

Warranty

The terms of the guarantee applicable in
each country have been published by our
respective national distributors. We will re-
pair possible faults on your unit free of
charge within the warranty period, insofar
as the faults are caused by material defects
or defective workmanship. Guarantee
claims should be addressed to your dealer
or the nearest authorized customer service
centre, and supported by documentary evi-
dence of purchase.
6

Safety instructions

 Please observe the safety instructions
of your high pressure cleaner.
Danger
 High pressure jets can be dangerous if
improperly used. The jet must not be di-
rected at persons, animals, live electri-
cal equipment or at the appliance itself.
 The jet must not be directed at other
persons or directed by the user at him/
herself to clean clothing or footwear.
 The handgun is subjected to a torque
force when the water jet is discharged
at the tilted special lance. According to
the guidelines, the handgun has a max.
torque of 20 Nm. Determine the nozzle
size permissible as described in the the
preparation chapter, in order not to ex-
ceed the max. torque.
 Familiarize yourself step-by-step with
the effect of the tilted special lance. Do
not tilt the special lance until the high-
pressure cleaner has been turned on.
 Make sure that you have a firm footing.
Hold the handgun and special lance
firmly.
 Hold on securely to the handle of the
special lance, as the adjusted angle
may change otherwise.
 Never use the appliance to clean ob-
jects containing hazardous substances
(e.g. asbestos).
 Do not use the accessories on slippery
floors or ladders.
 Do not use the accessories on scaffold-
ings without first securing them against
falling.
 Wear protective clothing and safety
goggles to protect against splash back
containing water or dirt.
 Do not process any inflammable, explo-
sive, corrosive or poisonous consuma-
bles.
 Do not touch uninsulated components if
they have been treated with consuma-
bles whose temperature exceeds 40°C.
– 1
EN