Advertisement
Operator's Manual
SAFETY RULES
Fall Hazards
Do not use as a personnel
lifting platform or step.
Do not stand or sit on the
load platform.
Do not climb on the
machine.
Tip-over Hazards
Do not exceed the rated load capacity. The
maximum capacity is 200 lbs / 91 kg.
Do not raise the load unless the legs have been
fully lowered and locked.
Do not raise the load unless the machine is on a
firm, level surface.
Do not move the machine with a raised load,
except for minor positioning.
Do not tilt the machine back with a raised load.
Do not operate the machine unless the wheel/leg
configuration is properly installed.
Do not use blocks to level the machine.
Do not operate the machine in strong or gusty
winds. Increasing the load surface area will
decrease machine stability in windy conditions.
2
Do not place ladders or scaffolding against any part
of the machine.
Prior to use, check the work area for drop-offs,
holes, bumps, debris, unstable or slippery surfaces
or other possible hazardous conditions.
Avoid debris and uneven surfaces while rolling a
machine with the legs folded up.
Do not replace machine parts critical to stability or
structure with items of different weight or
specification.
Do not cause a horizontal force or side load to the
machine by raising or lowering a fixed or
overhanging load.
Do not use the machine on a moving or mobile
surface or vehicle.
Collision Hazards
Do not raise if the load is not properly centered on
the load platform.
Check the work area for
overhead obstructions or
other possible hazards.
Do not stand under or allow
personnel under the
machine when the load is
raised.
Do not lower the load
unless the area below is clear of personnel and
obstructions.
Use common sense and planning when transporting
the machine on an incline, slope or stairs.
Genie Load Lifter
Third Edition • Second Printing
Part No. 82299
Advertisement
