Genie GS-2668 RT Operators Manual With Maintenance Information
  1. Manuals
  2. Brands
  3. Genie Manuals
  4. Lifting Systems
  5. GS-2668 RT
  6. Operators manual with maintenance information

Genie GS-2668 RT Operators Manual With Maintenance Information

Hide thumbs Also See for GS-2668 RT:

Advertisement

Table of Contents

See also: Service Manual , Operator's Manual
Operator's Manual
with Maintenance Information
Third Edition
Second Printing
Part No. 82414

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GS-2668 RT and is the answer not in the manual?

Questions and answers

Related Manuals for Genie GS-2668 RT

Summary of Contents for Genie GS-2668 RT

  • Page 1 Operator’s Manual Third Edition Second Printing with Maintenance Information Part No. 82414...

  • Page 2: Table Of Contents

    Only trained and authorized personnel shall be permitted to operate this machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times. If you have any questions, please call Genie Industries. Contents Page Safety ................

  • Page 3: Safety

    You read, understand and obey employer's safety rules and worksite regulations You read, understand and obey all applicable governmental regulations You are properly trained to safely operate the machine. Part No. 82414 Genie GS-2668 RT and Genie GS-3268 RT...
  • Page 4 Do not operate the machine during lightning or storms. Do not use the machine as a ground for welding. Genie GS-2668 RT and Genie GS-3268 RT Part No. 82414...
  • Page 5 Do not replace items critical to machine stability the machine in the stowed position across uneven with items of different weight or specification. terrain, debris, unstable or slippery surfaces and near holes and drop-offs. Part No. 82414 Genie GS-2668 RT and Genie GS-3268 RT...
  • Page 6 Do not place loads outside the platform perimeter. platform and the surface area of the platform or the load. Genie GS-2668 RT and Genie GS-3268 RT Part No. 82414...
  • Page 7 Do not operate a machine in the path of any crane or moving overhead machinery unless the controls of the crane have been locked out and/or precautions have been taken to prevent any potential collision. Part No. 82414 Genie GS-2668 RT and Genie GS-3268 RT...
  • Page 8 Immediately tag and remove from service a damaged or malfunctioning machine. Be sure all maintenance has been performed as specified in this manual and the appropriate Genie service manual. Be sure all decals are in place and legible. Be sure the operator’s, safety and responsibilities manuals are complete, legible and in the storage container located on the platform.
  • Page 9 Do not adjust the outriggers while the platform is raised. Do not drive while the outriggers are lowered. Part No. 82414 Genie GS-2668 RT and Genie GS-3268 RT...
  • Page 10 Yellow without safety alert symbol—used to indicate the presence of a potentially hazardous situation which, if not avoided, may result in property damage. Green—used to indicate operation or maintenance information. Genie GS-2668 RT and Genie GS-3268 RT Part No. 82414...

  • Page 11: Legend

    7 Platform extension tie-down 8 Outrigger housing (if equipped 17 Ground controls with LCD with outriggers) readout screen 9 Outrigger footpad (if equipped 18 Ground controls side cover with outriggers) Part No. 82414 Genie GS-2668 RT and Genie GS-3268 RT...

  • Page 12: Controls

    Platform down button 20 amp circuit breaker for controls circuit Key switch for platform/off/ground control LCD readout screen selection Gasoline/LPG models: Choke button Red Emergency Stop button Diesel models: Glow plug button Genie GS-2668 RT and Genie GS-3268 RT Part No. 82414...
  • Page 13 17 Proportional rocker switch for Diesel models: Glow plug 11 Red Emergency Stop button outrigger up/down and button platform up/down 12 Function enable switch 6 Gasoline/LPG models: LPG operation button with indicator light Part No. 82414 Genie GS-2668 RT and Genie GS-3268 RT...

  • Page 14: Pre-Operation Inspection

    Scheduled maintenance inspections shall be performed by qualified service technicians, according to the manufacturer's specifications and the requirements listed in the responsibilities manual. Genie GS-2668 RT and Genie GS-3268 RT Part No. 82414...
  • Page 15 Fuel and hydraulic tanks o Drive motors o Wear pads o Tires and wheels o Engine and related components o Limit switches, alarms and horn o Nuts, bolts and other fasteners Part No. 82414 Genie GS-2668 RT and Genie GS-3268 RT...

  • Page 16: Maintenance

    Indicates that tools will be required to perform this procedure. Indicates that new parts will be required to perform this procedure. Indicates that a cold engine is required before performing this procedure. Genie GS-2668 RT and Genie GS-3268 RT Part No. 82414...
  • Page 17 Do not overfill. 6 Install the vent caps. Adding terminal protectors and a corrosion preventative sealant will help eliminate corrosion on the battery terminals and cables. Part No. 82414 Genie GS-2668 RT and Genie GS-3268 RT...
  • Page 18 1 Check the fluid level in the coolant recovery tank. Add fluid as needed. Bodily injury hazard. Fluids in the radiator are under pressure and extremely hot. Use caution when removing cap and adding fluids. Genie GS-2668 RT and Genie GS-3268 RT Part No. 82414...

  • Page 19: Function Tests

    Push and hold the platform up button. After repairs are completed, the operator must Result: The platform should raise. perform a pre-operation inspection and function tests again before putting the machine into service. Part No. 82414 Genie GS-2668 RT and Genie GS-3268 RT...
  • Page 20 Result: The horn should sound. panel. Result: The steer wheels should turn in the direction that the yellow triangle points on the control panel. Genie GS-2668 RT and Genie GS-3268 RT Part No. 82414...
  • Page 21 0.73 feet / 22 cm per second. If the drive speed with the platform raised exceeds 0.73 feet / 22 cm per second, immediately tag and remove the machine from service. Part No. 82414 Genie GS-2668 RT and Genie GS-3268 RT...

  • Page 22: Workplace Inspection

    It is the operator's responsibility to read and remember the workplace hazards, then watch for and avoid them while moving, setting up and operating the machine. Genie GS-2668 RT and Genie GS-3268 RT Part No. 82414...

  • Page 23: Operating Instructions

    4 Inspect the workplace. inspection before using the machine. 5 Only use the machine as it was intended. Part No. 82414 Genie GS-2668 RT and Genie GS-3268 RT...
  • Page 24 Wait 60 seconds before trying to start again. In cold conditions, 20°F / -6°C and below, warm the engine for 5 minutes before operating to prevent hydraulic system damage. Genie GS-2668 RT and Genie GS-3268 RT Part No. 82414...
  • Page 25 At the Platform Controls Machine travel speed is restricted when the Push and hold the lift function enable button and platform is raised. activate the up/down rocker switch in the down direction. Part No. 82414 Genie GS-2668 RT and Genie GS-3268 RT...
  • Page 26 To control individual outriggers 1 Push and hold one or more outrigger buttons. 2 Activate the outrigger up/down rocker switch in the desired direction to level the machine. Genie GS-2668 RT and Genie GS-3268 RT Part No. 82414...

  • Page 27: Transport And Lifting Instructions

    Move the control handle off center to reset the brakes. Towing the Genie GS-2668 RT or the GS-3268 RT is not recommended. If the machine must be towed, do not exceed 2 mph / 3.2 km/h.
  • Page 28 Inspect the entire machine for loose or unsecured items. Use the tie-down points on the chassis for anchoring down to the transport surface. If the railings have been folded down, secure them with straps before transporting. Genie GS-2668 RT and Genie GS-3268 RT Part No. 82414...
  • Page 29 Attach the rigging only to the designated lifting points on the machine. Adjust the rigging to prevent damage to the machine and to keep the machine level. Y Axis X Axis Part No. 82414 Genie GS-2668 RT and Genie GS-3268 RT...

  • Page 30: Decals

    Warning - Explosion, Ether 52072 Notice - Kubota Diesel Engine Specs 97712 Danger/Notice - Brake Release Safety & 52431 Label - Ground Control Panel Operating Instructions 52475 Label - Transport Tie-down Genie GS-2668 RT and Genie GS-3268 RT Part No. 82414...
  • Page 31 52072 43696 or 82901 82366 82754 82754 or 82559 or 82755 82418 52475 82755 52070 44981 82793 82239 44220 Serial 28235 plate 82558 82721 52475 or 97712 52070 or 28174 Part No. 82414 Genie GS-2668 RT and Genie GS-3268 RT...
  • Page 32 Cosmetic - Genie GS-3268 RT 82755 Label - Wheel Load, GS-3268RT 82417 Platform Control Panel 82924 Caution - Component Damage 82418 Ground Control Panel 97719 Label - Safety Arm 82473 Caution - Compartment Access Genie GS-2668 RT and Genie GS-3268 RT Part No. 82414...
  • Page 33 82755 52475 82476 82754 28171 or 82755 82754 52967 or 82755 82476 28158 or 28159 82754 44981 82721 82495 52475 or 82755 28235 Serial 82560 82418 52475 or 28174 plate Part No. 82414 Genie GS-2668 RT and Genie GS-3268 RT...

  • Page 34: Specifications

    Airborne noise emissions 80 dB Maximum sound level at normal operating workstations (A-weighted) Continuous improvement of our products is a Genie policy. Product specifications are subject to change without notice or obligation. Genie GS-2668 RT and Genie GS-3268 RT Part No. 82414...
  • Page 35 Airborne noise emissions 80 dB Maximum sound level at normal operating workstations (A-weighted) Continuous improvement of our products is a Genie policy. Product specifications are subject to change without notice or obligation. Part No. 82414 Genie GS-2668 RT and Genie GS-3268 RT...
  • Page 36 Genie North America Phone 425.881.1800 Toll Free USA and Canada 800.536.1800 Fax 425.883.3475 Genie Australia Pty Ltd. Phone +61 7 3375 1660 Fax +61 7 3375 1002 Genie China Genie Scandinavia Phone +86 21 53852570...

This manual is also suitable for:

Gs-3268 rt

Table of Contents