Garmin Tempe Instructions

Instructions
WARNING
Important Safety and Product
See the
Information
guide in the GPS product box
for product warnings and other important
information.
Do not use a sharp object to remove
user-replaceable b
atteries.
Contact your local waste disposal department
to properly recycle the batteries. Perchlorate
Material — special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
Separating the Sensor from the
Clip
1
Press the tab (1) on the clip.
2
Lift and separate the sensor (2) from the
clip.

Installing the Battery

1
Locate the circular battery cover (1) on
the back of the device.
2
2
Turn the cover counter-clockwise until it
is loose enough to remove.
3
Remove the cover.
4
Place the battery into the cover with the
positive side facing the inside of the
cover.
5
Replace the cover by aligning the dots
(2) and rotating clockwise.

Installing the Device

NOTICE
The sensor should be attached to a secure
strap or loop.
You can also place the sensor in an
exterior jacket pocket.
1
Place the clip behind the strap or loop.
2
Align the arrow on the sensor and clip.
3
Snap the sensor into the clip.
Pairing the Sensor with your
Device
Before you can view temperature data on
your compatible GPS device, you must pair
the sensor with the device.
3