FabiaTech FX5612 User Manual page 27

FabiaTech Corporation
Quick Power On Self Test
This option speeds up Power On Self Test (POST) after you power on the computer.
If it is set to Enable, BIOS will shorten or skip some items' checks during POST.
Available options: Disabled, Enabled
Default setting: Enable
First /Second /Third/Boot Other Device/ Boot Device
This field specifies which device the system looks first upon power on.
Available options: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3,
ZIP100, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, LAN and Disable
Default setting: HDD-0, CDROM, LAN
Boot Up Numlock status
This field is used to activate the Num Lock function upon system boot. If the setting
is on, after a boot, the Num Lock light is lit, and user can use the number key.
Available options: On, Off
Default setting: On
Typematic rate Setting
This function specifies the keystroke repeat rate when a key is pressed and held
down.
Available options: Disable, Enable
Default setting: Disable
Typematic Rate (Chars/Sec)
Typematic Rate sets the rate at which characters on the screen repeat when a key
is pressed and held down.
Available options: 6, 8, 10, 12, 15, 20, 24, or 30 characters per second
Default setting: 6
Typematic Delay (Msec)
The number selected indicates the time period between two identical characters
appearing on screen.
Available options: 250,500 750 and 1000
22