Installing Compact Flash - FabiaTech FX5612 User Manual

FabiaTech Corporation

Installing Compact Flash

If you are installing Compact Flash modules you need to remove a backside
cover. t is necessary to bend the CF ejector outside before closing the cover.
I
(Please see the spots circled.)
Note: Unscrew the screws when installing Compact Flash module.
The Compact Flash socket (on the FX5612) supports 3.3V Compact Flash
and Micro Drives. The Jumper is used to select master/slave device of this
socket. Be sure to avoid the same master/slave setting with which connects
to IDE connector, if you use CF and IDE hard disk simultaneously.
8
Master or slave drives
select for Compact Flash
2
2
1
1
Open Close
Slave
Factory Preset