Toshiba MCY-MHP0305HT-C Service Manual page 152

No. Component
1 Detachment
.
Handle
14
1) Perform Step 1) to 3) of 1 of 1.
(Front
panel)
2) Remove the cushioning without tearing it. ( Fig. 14-1 )
3) Use a flathead screwdriver or something to press on
the 3 clamp hooks on the handle. ( Fig. 14-2 )
2 Attachment
.
1) Install it in the reverse of the procedure to remove it.
The cushioning for the handles acts as waterproofing, so
carefully stick it back on its original position so there are no gaps
caused by it ripping or lifting up.
Putting the vertical direction of the cushion is based on the clamp
hook, and bumps the left side to the cushion. ( Fig. 14-3 )
Handle
15 1 Detachment
.
(Side
1) Perform Step 1) to 3) of 1 of 1.
panel)
2) Remove the cushioning without tearing it. ( Fig. 15-1 )
3) Use a flathead screwdriver or something to press on the 3 cla
mp hooks on the handle. ( Fig. 15-2 )
2 Attachment
.
1) Install it in the reverse of the procedure to remove it.
The cushioning for the handles acts as waterproofing, so carefully
stick it back on its original position so there are no gaps
caused by it ripping or lifting up.
The cushion is put based on the dent of Side panel. ( Fig. 15-3 )
Procedure
151
Remarks
Cushioning
( Fig. 14-1 )
Flathead screwdriver
Clamp hook
(3 positions)
( Fig. 14-2 )
Front panel
Bump to cushion,
stick it. stick it.
Hook
Reference position of
sticking the cushion
( Fig. 14-3 )
Cushioning
( Fig. 15-1 )
Flathead screwdriver
Clamp hook
(3 positions)
( Fig. 15-2 )
Side panel
Reference
Reference
position of
position of
sticking the
sticking the
cushion
cushion
Reference position of
sticking the cushion
( Fig. 15-3 )