Toshiba MCY-MHP0305HT-C Service Manual page 142

No. Component
Discharge 1. Detachment
2
cabinet
1) Perform Step 1 of 1.
2) Remove the screws of the discharge cabinet
top of the heat exchanger plate.
(M4×10, 1 ) ( Fig. 2-1 )
Heat exchanger
screw (1 posi on)
3) Remove the screws of the discharge cabinet
and fin guard.
(M4×10, 3 ) ( Fig. 2-3 )
4) Remove the screws of the discharge cabinet
and partition plate.
(M4×10, 3 ) ( Fig. 2-4 )
5) Remove the screws of the discharge cabinet
and bottom plate.
(M4×10, 2 ) ( Fig. 2-4 )
6) Remove the screws of the discharge cabinet
(upper) and motor base.
(M4×10, 2 ) ( Fig. 2-5 )
2. Attachment
1) Mount by reversing the detachment procedure,
attaching the discharge cabinets in order.
Insert the hooking tabs into the holes in the
motor base and fix discharge cabinet in
place with screws. ( Fig. 2-6 )
Procedure
( Fig. 2-1 )
Motor base
screws (2 po ons)
( Fig. 2-5 )
Hooking tabs
( Fig. 2-6 )
141
Remarks
Discharge
cabinet
Par
( Fig. 2-2 )
screws (3po
Discharge
cabinet
Fin guard
screws
( Fig. 2-3 )
( Fig. 2-4 )
Bottom plate B tt l t
screws
on plate
ons)