Teufel MUSICSTATION Technical Description And User Manual page 22

6. Select the region for your Wi-Fi now
so that the correct standards are
applied.
7. The MUSICSTATION will search
for available Wi-Fi networks and
display them as a list after a short
time:
• [WPS] – displays networks with
WiFi protected setup. It is very
easy to establish a connection
with them with the push of a
button or by entering the PIN.
• [Rescan] – starts a new search.
• [Manual config.] – with this
menu item, you enter all data
yourself – only intended for
special applications.
8. Select your Wi-Fi network from the
list.
9. You can now select the type of
connection to be established:
– With password (WPA/WPA2):
Password:
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
Enter the password:
– Use the sensor control (10) or
the buttons
(43) to select a character.
22 • MUSICSTATION
B K S P
OK
C A N C E L
(28) (41) (42)
– By pushing the centre of the
sensor control (10) or the
button (29), you adopt the
character at the top of the input
line.
[BKSP] deletes the last char-
acter,
[OK] ends input,
[CANCEL] aborts the process.
– With WPS:
Here, you can choose from three
options:
• Push a button – start estab-
lishing a connection for your
Wi-Fi access (router) via WPS
and push the centre of the
sensor control (10) or the
button (29) within 2 minutes
on the MUSICSTATION.
• PIN – the MUSICSTATION
displays a code. Enter this code
on your Wi-Fi access (router).
• Skip WPS – with this, you enter
the password as described
previously.
The MUSICSTATION will now connect
to Wi-Fi and then briefly return the
message "Connected".
– Finish by pushing the centre of the
sensor control (10).
The setup wizard is now complete.
The MUSICSTATION displays the main
menu.