Table of Contents
Advertisement
Setup/Mounting
NOTICE
If the device is subjected
to warm temperatures after
being cold (e.g. after trans-
port), condensation may occur
inside of it.
– In this case, wait approx.
2 hours before you connect
and activate it.
Location tips
• Select a stable, level base.
In case of wall mounting, follow the
instructions in the next chapter.
• Make sure that the environment is
clean and free from dust.
• Select a location away from heat
sources and direct sunlight.
• Do not place any heavy objects on
the cables or the device.
Replacing the protective
grate
Your can purchase protective speaker
grates in different colours for your
MUSICSTATION.
To replace the protective grate:
1. The lateral panels are hook-
mounted. From the front, gently
push on the edge of the grate and
reach behind the panels.
16
• MUSICSTATION
2. Carefully loosen the panels and
fold them to the fore.
1
2
3
4
5
3. Carefully loosen the grate front
from the device and remove it.
1
2
3
4
5
4. Place the new grate on the front of
the device. Ensure that the eight
guide pins of the grate exactly fit
into the corresponding guides on
the device.
1
2
3
4
5
5. Carefully push the grate onto the
device so that is securely attached.
6. Fold the side panels onto the
device and push them into place
carefully.
Advertisement
Table of Contents
