Configuring The System Settings - Alpine DVR-C320R Owner's Manual

Settings
Options
Low Speed FCWS
BCW
(Back Collision Warning)
BCW speed
FVDW
(Front Vehicle Departure
Warning)
ADAS Volume
• The driver is responsible for safe driving. The driver must not excessively rely on the safe driving warning
features. The driver bears responsibility for always being aware of the vehicle's surroundings, and must
strive for safe driving.
• The safe driving warning features are intended as support that can warn the driver and help prevent
accidents. However, they are not responsible for preventing accidents. In addition, the operation of these
features is not completely guaranteed. Be aware that Alpine shall accept no liability for any resulting
losses if these features fail to operate.
These features may malfunction due to the vehicle shape and its reflections in the windscreen. If
malfunctions occur frequently, adjust so that the reflection is below the horizontal guide line in the ADAS
settings, then perform the Initialize ADAS action.

5.4 Configuring the system settings

On the Settings screen, tap System Settings.
Options
Language
Volume
Security LED
Time Zone
Daylight Saving
Speed Unit
Speed Stamp
32
Detects threats ahead and warns the driver (Beep) when the vehicle is moving
between 10-30 km/h.
Select from OFF/Low/Mid/High for the low speed FCWS sensitivity.
Detects rear collision threats, warns the driver (Beep), and records video when the
vehicle is moving at 50 km/h or above and another vehicle remains within 10 m of
the rear of the vehicle for 5 seconds.
Select from ON/OFF for the BCWS feature.
You can change the back collision warning system speed.
Select the minimum speed for activating warnings: 30mph/40mph/50mph/65mph.
Notifies the driver (Beep) when another vehicle in front of the vehicle has started
moving after it had been stopped there for 4 seconds or longer.
Select from ON/OFF for the FVDW feature.
You can adjust the volume of ADAS system warnings.
Select the desired ADAS volume level.
Select the desired language.
Select the desired volume level.
Select from ON/OFF for the security LED.
Select the desired time zone.
Select from ON/OFF for the daylight saving.
Select from km/h / mph for the speed unit.
Select from ON/OFF for the speed stamp.
Description
Description