Setting Road Safety Features; Setting The Safety Cameras; Setting The Mobile Zone Alert; Configuring The System Settings - Alpine DVR-F200 Owner's Manual

Settings

6.4 Setting road safety features

You can activate or deactivate a safety camera alert system.

6.4.1 Setting the safety cameras

When the vehicle approaches or passes the speed limit zone, the safety camera alert system will collect
GPS signals and safety camera data. Refer to the following instructions to enable or disable this feature.
1
From the mobile viewer, tap Dash Cam Settings
2
From Safety Cameras, select Enabled or Disabled. The new setting is applied automatically.

6.4.2 Setting the mobile zone alert

Follow the instructions to turn on or off the mobile zone alert.
1
From the mobile viewer, tap Dash Cam Settings
2
From Mobile Zone Alert, select Enabled or Disabled. The new setting is applied automatically.

6.5 Configuring the system settings

This menu allows you to configure the hardware settings that are globally applied to the system during
operation, such as the display language and screen brightness.

6.5.1 Setting the display language

Select a language to display on the screen. Follow the instructions to select a language.
1
From the mobile viewer, tap Dash Cam Settings
2
From Language, select the desired language. The new setting is applied automatically.
38
Road Safety Settings.
>
Road Safety Settings.
>
System Settings.
>
Autogoods "130"