Basic Connection Diagrams; Connecting The Product - Alpine DVR-C320R Owner's Manual

1.4 Basic connection diagrams

1.4.1 Connecting the product

Configure the product correctly according to the connection diagram.
The connection diagram is for reference only. The product must be professionally installed in the vehicle by
an Alpine authorized dealer/a trained specialist mechanic.
Car charger cable
Hardwiring cable
R CAM
F CAM
CABLE
CABLE
REMOCON
REMOCON
R CAM
Yellow
BAT
Red
ACC
Black
GND
(4)
(6)
LIN
(7)
LIN
(8)
IN
(8)
OUT
(1)
* The rear camera extension cable is only
(2)
required if the cable length is insufficient.
Rear camera
(3)
Rear camera
extension cable
(5)
Not used.
(1) BAT
Connect the cord that supplies battery power (12V).
(2) ACC
Connect the cord that supplies accessory power (12V).
Not used.
(3) GND (ground cord)
Connect this securely to a metal part of your vehicle's body.
Insufficient grounding may result in noise or malfunction.
(4) R CAM (rear camera video input terminal)
This terminal is used to input video from the rear camera.
(5) F CAM (front camera video output terminal)
This terminal is used to output a video signal.
(6) (7) Not used.
W hen connected to an Alpine product, some features of
this product or other device may be unavailable.
(8) REMOCON IN /OUT cable
Used when the product is used in combination with
Alpine navigation/display audios that support
REMOCON communication.
DVR-C320R
*
Product overview
Rear camera
cable
13