Viewing Product Information; Initializing The System Settings (Reset Settings) - Alpine DVR-C320R Owner's Manual

5.5 Viewing product information

On the Settings screen, tap the system settings.
• Model Name
• MICOM Ver.

5.6 Initializing the system settings (Reset Settings)

You can return all system settings to the factory default settings.
1
On the Settings screen, tap System Settings, and then tap Reset to initialize the settings.
2
Tap the confirmation button on the confirmation window. All system settings will be initialized.
3
When initialization is complete, a confirmation window will appear. Tap the confirmation button to
close the window. (If there is no user input, the window will disappear after 5 seconds.)
Do not disconnect the power or remove the memory card from the product while initialization is in progress.
Doing so may damage the data stored in the memory card.
• Firmware Ver.
• Memory Size
• Safety Camera Ver.
• Local ID
Settings
33