Download Print this page
Alpine SGS-CH01 Installation Manual

Alpine SGS-CH01 Installation Manual

Jeep wrangler factory radio camera interface with active guideline system

Advertisement

Quick Links

Jeep Wrangler
SGS-CH01
Factory Radio Camera Interface
with Active Guideline system
Installation Manual
˜ Model: Wrangler
˜ Model Year: 2011-2018
DISCLAIMER: The active guideline feature of this product is calibrated for use with JEEP WRANGLER model years
2011-2018. The accuracy of the active guideline system cannot be guaranteed if used in conjunction with other
vehicles or those which contain non-factory parts which may affect the turning radius of the vehicle.
* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is
not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Warning: Before you begin wiring, remove the ground wire from the negative
terminal of the battery. Failing to do so can lead to electric shock, injury or damage
to equipment.
Introduction
˜ Congratulations on purchasing the SGS-CH01. This installation manual is designed to take you through the
installation of SGS-CH01. Please familiarize yourself with the owners manual and if you still have additional
questions please call 1-800-TECH-101.
Note
˜ Design and specifications are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions
˜ The installation of this product requires specialized skills and experience. We recommend that you have the
product installed by an Alpine authorized dealer.
˜ Before you use this product, be sure to carefully read this installation manual and the separate user's manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
˜ This manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Ignoring the content marked by this indication and using the product incorrectly is
Warning
expected to lead to death or serious injury.
Ignoring the content marked by this indication and using the product incorrectly is only
Caution
expected to lead to injury or property damage.
SGS-CH01
Model
Year
Wrangler (JK)
2007-2010
Jeep
Wrangler (JK)
2011-2018
Jeep/Chrysler/Dodge
˜ 1/11
Active Guidlines
Static Guidelines

Advertisement

loading
Need help?

Need help?

Do you have a question about the SGS-CH01 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Alpine SGS-CH01

  • Page 1 ˜ Before you use this product, be sure to carefully read this installation manual and the separate user's manual so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as a result of failure to follow the instructions in the manuals.
  • Page 2 Forbidden requires specialized skills and experience. steering wheel, gearshift, or the like; or Have the product installed by an Alpine pose a threat to passengers. Doing so could authorized dealer. lead to an accident or injury.
  • Page 3 Jeep/Chrysler/Dodge SGS-CH01 ˜ 3/11 Tools Possibly Required (This Will Vary Depending On The Vehicle) Panel Removing Tool Sockets Phillips Screwdriver Wire Cutters Extension Ratchet Crimpers Pliers Torx Screwdriver Accessory List Installation Kit Parts Interface Module Camera Harness Main Harness CAM TRIG...
  • Page 4 Jeep/Chrysler/Dodge SGS-CH01 ˜ 4/11 SGS-CH01 Wiring Diagram: OEM Head Unit With HCE-TCAM1-WRA Factory Head Unit SGS-CH01 To SGS-CH01 Main Connector To Factory To Factory Main Camera Connector Harness Connector To Rear Camera Input To HCE-TCAM1-WRA Connector HCE-TCAM1-WRA (Sold Separately) +12V...
  • Page 5 Jeep/Chrysler/Dodge SGS-CH01 ˜ 5/11 SGS-CH01 Wiring Diagram: OEM Head Unit With Aftermarket Camera Factory Head Unit SGS-CH01 To SGS-CH01 Main Connector To Factory To Factory Main Camera Connector Harness Connector To Aftermarket Rear Camera Ground And Accessory Can Be Used To Power Aftermarket Camera.
  • Page 6 Jeep/Chrysler/Dodge SGS-CH01 ˜ 6/11 SGS-CH01 Wiring Diagram: OEM Head Unit With KCX-C2600B (Sold Separately) Factory Head Unit SGS-CH01 To SGS-CH01 Main Connector To Factory To Factory Main Camera Connector Harness Connector To Rear Camera Input KCX-C2600B (Sold Separately) HCE-TCAM1-WRA* (Sold Separately) 1 - V.
  • Page 7 Jeep/Chrysler/Dodge SGS-CH01 ˜ 7/11 SGS-CH01 Wiring Diagram: Alpine Head Unit With HCE-TCAM1-WRA Direct Camera Adapter Direct Camera (ships with head unit) Input SGS-CH01 Alpine Head Unit (Sold Separately) DISP. OUT CAN I/F HDMI IN HDMI OUT SXM/DAB PRE OUT EXT. KEY W.REMOTE...
  • Page 8 Jeep/Chrysler/Dodge SGS-CH01 ˜ 8/11 Wire Harness Pin Outs Jeep T-Harness Male SGS-CH01 Connector Black 18AWG + 22AWG White 22AWG White 22AWG White 22AWG White 22AWG White 22AWG White 22AWG White 22AWG White 22AWG White 22AWG White 22AWG White 22AWG White 22AWG...
  • Page 9: Dip Switch Settings

    1 2 3 4 2007-2010 Jeep Wrangler JK- Remove power by unplugging the main connector to the SGS-CH01. To enable static guidelines dip switch 1 must be DOWN (On position) and dip switches 2, 3, and 4 must be UP (Off position).
  • Page 10 Jeep/Chrysler/Dodge SGS-CH01 ˜ 10/11 Using On-Screen Display (OSD) Interface To Turn Off Guidelines Menu Down 1 2 3 4 Engage vehicle in reverse gear. The 3 buttons on the side of the module are used to make selections with the On-Screen Display. Press the “Menu”...
  • Page 11: Led Functions

    ˜ 11/11 LED Functions The top LED will flash when CAN data is being read by the SGS-CH01 The bottom LED will remain on solid when vehicle CAN data is active. It will turn off when the vehicle CAN data turns off.