Using Recording Features; Turning The Product On Or Off; Learning About File Storage Locations - Alpine DVR-C320R Owner's Manual

3. Using recording features

3.1 Turning the product on or off

The product is turned on automatically and continuous recording starts when you turn on the ACC or start
the engine. To power off the product, press and hold the Power button. To turn the power back on, press the
Power button again.
Wait until the product is completely booted up after turning it on, and then begin operating the vehicle. The
video recording does not begin until the product is completely turned on (booted up).

3.2 Learning about file storage locations

Videos are stored in the following folders according to their recording mode.
The Alpine
navigation/display
audio system
In the memory
card
Play videos on Window/Mac computer or using the ALPINE Recording Viewer application. If you play videos
by inserting the memory card in devices such as a smartphone or a tablet PC, the video files may be lost.
A file name is composed of the recording start date and time, and the recording option.
REC_2020_07_01_10_25_30_F
REC_2020_07_01_10_25_30_R
REC_2019_07_01_10_25_30_GS.MP4
20
Continuous
Continuous
Incident
cont_rec evt_rec
Manual Recording Motion Detection
manual_rec
Recording conditions
• F: Front camera
• R: Rear camera
Parking Incident
motion_
parking_rec
timelapse_rec