Spray Gun Overview; Contents - 3M Accuspray 26580 Owner's Manual

IMPORTANT NOTE: The noise and vibration values stated are from laboratory testing in conformity with stated codes and
standards and are not suffi cient risk evaluation for all exposure scenarios. Values measured in a particular work place may
be higher than the declared values. The actual exposure values and amount of risk or harm experienced to an individual
is unique to each situation and depends upon the surrounding environment, the way in which the individual works, the
particular material being worked, work station design, as well as upon the exposure time and the physical condition of the
user. 3M cannot be held responsible for the consequences of using declared values instead of actual
exposure values for any individual risk assessment.
For the most up-to-date version of this manual, please visit your local 3M Collision. website.
Spray Gun Overview
3M™ Accuspray™ Spray Guns were designed from the inside out for the eff ective, effi cient, and economical application of
paints, adhesives, coatings and fi nishes. This spray gun has a large spray pattern with very low overspray. The soft, tight,
adjustable pattern with complete atomization results in a high fi nish quality and absolute control. Each ultra-light weight
spray gun is designed for easy handling, reliability and durability and for minimum maintenance costs. Combine your
3M™ Accuspray™ Spray Gun with the 3M™ PPS™ Paint Preparation System and enjoy additional savings of time and
cleaning solvents.
3M™ Accuspray™ Spray Gun is for professional use only. Hazards can occur from equipment misuse. Any misuse of the
equipment or accessories, such as over pressurizing, modifying parts, using incompatible chemicals and fl uids, or using
worn or damaged parts can cause serious bodily injury, fi re, explosion or property damage. Read and follow all Safety
Statements and Instructions.

CONTENTS

Unpacking
Remove the components from the box. Inspect for concealed damage and/or missing items. If you discover any damage
and/or missing pieces, contact your distributor immediately.
Your 3M™ Accuspray™ Spray Gun Kit could include one or more of the following, depending on the kit that was purchased:
• 1 Spray Gun Body
• 1 Air Flow Control Valve
• 1.2 mm atomizing head
• 1.3 mm atomizing head
• 1.4 mm atomizing head
• 1.8 mm atomizing head
• 2.0 mm atomizing head
• 10 Color Identifi cation Clips (2 each of 5 colors)
• PPS™ Standard Size Mixing Cup
• PPS™ Standard Size Lids and Liners
• PPS™ Sealing Plugs
3M™ Accuspray™ Spray Gun
The 3M™ Accuspray™ Spray Gun is for use with compressed air
systems and features a black composite* body, 13 scfm (370.5 L/min)
air consumption and 1/4" (1/4" BSP) air inlet.
Maximum inlet pressure with full trigger pull**
1.2, 1.3, 1.4, 1.8, 2.0 mm nozzles = 24 psi (1.65 bar)
* Product material compatibility information available upon request.
** Maximum inlet pressure will yield approximately 10 psi (0.69 bar)
at the air cap.
6