Page 1
THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this exhaust fan. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement...
Warranty LIMITED LIFETIME WARRANTY WHAT IS COVERED If this product fails due to a defect in materials or workmanship at any time during the first THREE years of ownership, the manufacturer will replace it free of charge, postage-paid at their option. This warranty does not cover products that have been abused, altered, damaged, misused, cut or worn. This warranty does not cover use in commercial applications.
Pre-Installation WIRING DIAGRAMS FA N BLACK (LIVE) WHITE (NEUTRAL) GREEN (GROUND) QUICK CONNECTOR INSTRUCTIONS □ Strip wires 3/8 in. - 1/2 in. To be sold only with installation instructions. □ Grip the wire firmly and push the stripped end of the wire WARNING: Wiring must comply with all applicable electrical into the open port of the connector.
Installation - New Construction CAUTION: Make sure power is switched off at service panel before starting installation. NOTE: Ceiling mount only. Attaching the fan housing to the Attaching the fan housing to the ceiling joist ceiling joist using suspension brackets □...
Page 7
Installation - New Construction (continued) Removing the wiring cover on the fan Connecting the duct housing □ Connect a 4 in. circular duct (not supplied) and vent to the □ Remove the wiring cover (1). Pull the house wires through outside.
Installation - Existing Construction CAUTION: Make sure power is switched off at service panel before starting installation. Removing the existing fan □ Remove the old fan from the ceiling. Measuring the ceiling opening □ Measure the opening to ensure it is large enough to accommodate the new fan body (A) (10.8 in.
Page 9
Installation - Existing Construction (continued) Removing the motor and power line □ Loosen the three screws where indicated by the arrows. □ Press the metal clip (1) and remove the motor and power line (2) from the housing (A). Removing the duct □...
Page 10
Installation - Existing Construction (continued) Installing the housing □ Pull the house wires through the wire cover hole (1). □ Pull the 4 in. circular duct (not provided) through the housing. □ Install the housing (A) to the joist using one of the following two methods: –...
Page 11
Installation - Existing Construction (continued) Connecting the duct □ Using duct tape or a hose clamp (not included), attach the 4 in. circular duct (not included) to the duct connector (1). □ Reconnect the duct connector using the previously- removed screws (2). Reinstalling the motor into the housing □...
Care and Maintenance WARNING: Disconnect power supply before servicing. □ See SAFETY INFORMATION before proceeding. Routine maintenance should be done at least once a year. □ Never use solvents, thinner or harsh chemicals for cleaning the fan. □ Do not allow water to enter the motor. □...
Page 13
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.